Block Jointing Mortar

POLYBOND Ready Mix Mortar is manufactured with well graded river sand in accurate proportion with cement and high quality additives.

The POLYBOND Mortar is manufactured in fully automated plant under high quality control standards.

The POLYBOND Mortar can be used for all AAC / Solid / Hollow block masonry work.

DETAILS OF INGREDIENTS:

Sand from Tapti- River - Up to 1 mm.
OPC 53 - Ultratech Brand
High Quality Flyash
Hydrated Lime - with purity up to 85%
Polymers & Fibers

HOW TO USE:

Fix the blocks by uniformly applying a thin layer of 3 to 4mm of Polybond jointing mortar on the course. The Mortar should be mixed in 3 (Mortar) : 1 (Water) proportion by volume. Spread the mortar as you go along. Do not spread the mortar far ahead which will result in earlier setting.
It is not required to soak the AAC blocks completely in water. Only slight wetting of surface is enough.
Use a tray filled with 30 to 40mm of water. Before laying each block, immerse it in the tray from all sides and make it slightly wet on four sides. Then place the block firmly in position to have proper bond.
The first course of the masonry shall be laid with proper attention and should beuniformly aligned, levelled and plumbed. This ensures that the upper layers remain in true plumb and uniform level.
Apply the mortar on the side of a block as you move ahead. Ensure that mortar is uniformly spread over the block. None of the joints shall be left with a gap.

PACKING AND STORAGE:

The product is available in 40kg bags HDPE laminated bags. As the product is cementetius, it should be stored in covered, cool and dry place.
It should be used within 6 months from the date of manufacturing.

BENEFITS:

High quality POLYBOND Mortar due to uniform particle size distribution
High strength
Excellent workability

PRODUCT SPECIFICATIONS:

Packing: 40kg bags
Colour: Grey
Pot Life: 45 minutes
Bulk Density: 1550 kg/m3

REQUEST FOR QUOTATION